TPO Roofing • Grand Prairie

TPO Commercial Roofing in Grand Prairie, TX

Grand Prairie, Dallas County Licensed & Insured

Get Started

Free Roof Inspection

— Free Roof Inspection

Tell us about your roof.

Ariel Roofing installs, restores, and repairs tpo roofing on commercial buildings across Grand Prairie and Dallas County. Heat-welded thermoplastic single-ply — the default for modern low-slope commercial roofs. In North Texas we specify thicker 60–80 mil TPO over a hail-rated cover board rather than the 45 mil minimum, because stone impact bruises thin membrane over soft insulation and shows up as leaks two seasons later. Expected service life: 20–30 years.

Grand Prairie Considerations

  • Frequent hail, high wind across wide-open industrial sites, and thermal cycling on enormous single-ply roof fields.
  • Grand Prairie permits commercial re-roofing with inspection at attachment and completion; airport-adjacent sites need crane clearance planning.

What's Included

  • 60 mil and 80 mil membrane, mechanically attached or fully adhered
  • Hot-air welded seams — stronger than the sheet itself
  • Reflective white surface cuts rooftop and cooling load
  • Tapered polyiso and cover board engineered for positive drainage
  • 15–30 year manufacturer NDL warranty options

How TPO Roofing Actually Performs

TPO is a thermoplastic sheet welded seam to seam, so the finished roof behaves as one continuous membrane rather than a field of glued laps. The reflective surface keeps deck temperatures down, which matters on buildings with rooftop units and long duct runs. Failures are almost never in the field of the sheet — they happen at curbs, pitch pans, and drain sumps where detail work was rushed.

Why It Matters In Grand Prairie

In North Texas we specify thicker 60–80 mil TPO over a hail-rated cover board rather than the 45 mil minimum, because stone impact bruises thin membrane over soft insulation and shows up as leaks two seasons later. The Great Southwest Industrial District and the SH-161 logistics belt. Great Southwest Industrial District, SH-161 corridor, Arlington Municipal and Grand Prairie airport areas, and the I-20 distribution parks.

The Buildings We Install It On In Grand Prairie

One of the largest industrial districts in the country — tilt-wall warehouse and manufacturing on mechanically attached single-ply and aging built-up — plus aviation and defense facilities and newer big-box distribution.

Where We'd Recommend Something Else

We steer owners away from TPO on roofs with heavy grease exhaust, chemical discharge, or constant foot traffic around equipment. Those buildings do better on PVC, which is chemically resistant and holds up to restaurant and industrial exhaust.

What The Proposal Includes

Infrared moisture scan results, deck and insulation condition, tapered drainage design where it is needed, attachment and flashing detail, phasing plan around your operations, warranty terms, and a fixed price. No allowances that turn into change orders once the roof is open.

Service Area

TPO Roofing service area — Grand Prairie, TX

FAQ

Frequently Asked Questions

Do you install tpo roofing in Grand Prairie, TX?

Yes. Ariel Roofing installs and repairs tpo roofing on commercial buildings throughout Grand Prairie and Dallas County. In North Texas we specify thicker 60–80 mil TPO over a hail-rated cover board rather than the 45 mil minimum, because stone impact bruises thin membrane over soft insulation and shows up as leaks two seasons later.

How long does tpo roofing last in Grand Prairie?

20–30 years is the realistic service range when the system is installed to the manufacturer's detail and maintained. In Grand Prairie, frequent hail, high wind across wide-open industrial sites, and thermal cycling on enormous single-ply roof fields. That exposure — not the sheet itself — is what determines whether you reach the top or the bottom of that range.

What does a tpo roofing project cost in Grand Prairie?

We don't quote commercial roofing by the square over the phone. Price depends on deck type, existing insulation and how wet it is, tapered drainage design, rooftop equipment, access, and phasing around your tenants. We scan and measure the roof first, then hand you a fixed-price scope you can compare line for line.

Do you handle permits and inspections in Grand Prairie?

We pull the commercial re-roof permit in Grand Prairie, meet the inspections, and provide the insulation and membrane documentation the energy code requires on a tear-off.

Can you work around our tenants and operating hours?

Yes. Most of our Grand Prairie commercial work is phased — after-hours tear-off, weekend lifts, and section-by-section dry-in so no part of the building is ever left open overnight.

Should we repair, restore, or replace?

We give every owner all three numbers. An infrared scan tells us how much insulation is wet. Under roughly a quarter, restoration usually buys 10–15 years at a fraction of replacement. Above that — or with a compromised deck — replacement is the cheaper decision over five years.

Ready For A Free Roof Inspection?