Before
AfterProject 01
Industrial Coating Restoration
Arlington, TX
Industrial coating restoration extended roof life by 15 years. Full elastomeric system with polyester-reinforced seams and drains.
– Roof Coatings & Restoration –
Extend Your Commercial Roof 10–15 Years
Dallas • Texas
Licensed & Insured · Free Roof Inspections
Get Started
Free Roof Inspection
Tell us about your roof — we'll respond within one business day with a detailed report.
— Free Roof Inspection
Tell us about your roof.
A senior estimator will call within one business day to schedule your on-site assessment — no obligation, no high-pressure sales.
ROOF COATINGS & RESTORATION
Restoration coatings can turn a roof that seems ready to replace into another decade-plus of service life — at a fraction of the cost. Because they're a repair, they often qualify for immediate expense deduction instead of long-term depreciation.
A high-solids roof coating can add 10–15 years of life to an existing flat or metal roof at a fraction of the cost of a full replacement — and often qualifies for a same-year tax deduction as a maintenance expense rather than a capital improvement.
We install silicone, acrylic, and elastomeric coating systems from Gaco, Henry, and Karnak on flat, metal, and low-slope roofs across DFW. Every coating project starts with an infrared moisture scan to make sure we're not sealing water into the roof.
What's Included
- Silicone coatings for ponding water resistance
- Acrylic coatings for reflective energy savings
- Full roof cleaning, prep, and reinforcement
- 10–20 year manufacturer warranties available
- Typically 50–70% less than replacement
Our Process
How A Roof Coatings & Restoration Project Runs
01
IR Moisture Scan
Infrared scan identifies wet insulation that must be replaced before coating — critical to a lasting install.
02
Roof Prep + Repair
Power-wash, prime, and repair every seam, flashing, and penetration before the coating goes down.
03
Base + Top Coat
Two-coat systems typically achieve 25–30 mils dry film thickness — the minimum for manufacturer warranty.
04
Reinforced Details
Every seam, penetration, and drain gets a polyester fabric reinforcement embedded in the coating.
05
Manufacturer Warranty
10 to 15-year manufacturer warranties available on qualifying systems with certified installers.
Materials & Systems
What We Install
Gaco Silicone
High-solids silicone — best-in-class ponding water resistance. 50-year rated in ideal conditions.
Henry Acrylic
Cost-effective acrylic elastomeric for sloped applications. Excellent UV reflectivity.
Karnak Aluminum
Fibered aluminum coating for hot-mopped and modified bitumen roofs. Reflects up to 70% of solar heat.
Polyester Reinforcement
Non-woven polyester fabric embedded into details for tensile strength at seams and penetrations.
Why Ariel Roofing
Built To Do It Right The First Time
Commercial-only project managers on every job
IR moisture scanning to catch trapped water before install
Phased and after-hours scheduling to protect tenant operations
20-year NDL manufacturer warranties on qualifying systems
Detailed pre-construction plan with drawings and submittals
Preventative-maintenance programs to protect your investment
Recent Projects
Real Roofs We've Delivered
BeforeAfter
Before
AfterProject 02
Silicone Coating Restoration
Mesquite, TX
Weathered foam roof restored with reflective silicone coating — recovered the roof's waterproofing without any tear-off.
Before
AfterProject 03
Commercial Standing-Seam Metal
Richardson, TX
Metal panel roof re-coated with high-adhesion silicone system to seal fastener heads and lap seams.
