EPDM Roofing • Dallas

EPDM Commercial Roofing in Dallas, TX

Dallas, Dallas County Licensed & Insured

Get Started

Free Roof Inspection

— Free Roof Inspection

Tell us about your roof.

Ariel Roofing installs, restores, and repairs epdm roofing on commercial buildings across Dallas and Dallas County. Rubber membrane roofing — simple, forgiving, and long-proven on large low-slope roofs. A lot of 1980s–90s DFW office parks are on ballasted EPDM. Where the deck and insulation are dry, those roofs are often the best coating candidates in the region rather than tear-off jobs. Expected service life: 20–30 years.

Dallas Considerations

  • 100°F-plus summer deck temperatures, sharp winter swings, and several damaging hail events a season cycle membranes and fasteners until seams split.
  • Commercial re-roofs inside the city are permitted through Dallas Development Services, and any tear-off to deck triggers current energy-code insulation values.

What's Included

  • Ballasted, mechanically attached, and fully adhered assemblies
  • Black and white membrane options
  • Large sheet sizes mean fewer seams on wide-open roofs
  • Easy, inexpensive field repairs decades into service life
  • Handles extreme temperature swings without getting brittle

How EPDM Roofing Actually Performs

EPDM is a cured rubber sheet rather than a welded thermoplastic, so seams are made with tape and adhesive. It is forgiving, cheap to repair, and has the longest real-world track record of any single-ply. Age shows up at the seams and at flashings long before the field membrane gives out, which makes it a strong candidate for restoration instead of replacement.

Why It Matters In Dallas

A lot of 1980s–90s DFW office parks are on ballasted EPDM. Where the deck and insulation are dry, those roofs are often the best coating candidates in the region rather than tear-off jobs. Warehouse, mid-rise, and mixed-use rooftops across the urban core and the industrial corridors. Stemmons Corridor, Trinity Industrial, Design District, Deep Ellum, Uptown, Preston Center, the Central and LBJ office corridors, Redbird, and the Pleasant Grove industrial parks.

The Buildings We Install It On In Dallas

Mid-century tilt-wall warehouses on gravel built-up roofs at end of life, 1980s office parks on ballasted EPDM, newer distribution buildings on mechanically attached TPO, and Deep Ellum and Design District brick buildings with decades of patched modified bitumen.

Where We'd Recommend Something Else

Black EPDM on a cooling-dominated building adds rooftop heat you will pay for every month. If reflectivity matters to your energy numbers, we quote white EPDM or a thermoplastic instead.

What The Proposal Includes

Infrared moisture scan results, deck and insulation condition, tapered drainage design where it is needed, attachment and flashing detail, phasing plan around your operations, warranty terms, and a fixed price. No allowances that turn into change orders once the roof is open.

Service Area

EPDM Roofing service area — Dallas, TX

FAQ

Frequently Asked Questions

Do you install epdm roofing in Dallas, TX?

Yes. Ariel Roofing installs and repairs epdm roofing on commercial buildings throughout Dallas and Dallas County. A lot of 1980s–90s DFW office parks are on ballasted EPDM. Where the deck and insulation are dry, those roofs are often the best coating candidates in the region rather than tear-off jobs.

How long does epdm roofing last in Dallas?

20–30 years is the realistic service range when the system is installed to the manufacturer's detail and maintained. In Dallas, 100°F-plus summer deck temperatures, sharp winter swings, and several damaging hail events a season cycle membranes and fasteners until seams split. That exposure — not the sheet itself — is what determines whether you reach the top or the bottom of that range.

What does a epdm roofing project cost in Dallas?

We don't quote commercial roofing by the square over the phone. Price depends on deck type, existing insulation and how wet it is, tapered drainage design, rooftop equipment, access, and phasing around your tenants. We scan and measure the roof first, then hand you a fixed-price scope you can compare line for line.

Do you handle permits and inspections in Dallas?

We pull the commercial re-roof permit in Dallas, meet the inspections, and provide the insulation and membrane documentation the energy code requires on a tear-off.

Can you work around our tenants and operating hours?

Yes. Most of our Dallas commercial work is phased — after-hours tear-off, weekend lifts, and section-by-section dry-in so no part of the building is ever left open overnight.

Should we repair, restore, or replace?

We give every owner all three numbers. An infrared scan tells us how much insulation is wet. Under roughly a quarter, restoration usually buys 10–15 years at a fraction of replacement. Above that — or with a compromised deck — replacement is the cheaper decision over five years.

Ready For A Free Roof Inspection?