– Commercial Roofing –

Commercial Roofing Contractor — Dallas–Fort Worth & South Florida

Name: Ariel Roofing
Address: Dallas, TX, US
Telephone: +1 469-833-2332
Price range: $$

Dallas–Fort Worth, TX & Palm Beach to Miami, FL • Licensed & Insured

Get Started

Free Roof Inspection

— Free Roof Inspection

Tell us about your roof.

A senior estimator will call within one business day to schedule your on-site assessment — no obligation, no high-pressure sales.

Full Name *Email *Phone *

Address *

Is This a Residential or Commercial Project? *

Ariel Roofing installs, restores, and maintains low-slope and metal commercial roofing across two very different markets: Dallas–Fort Worth, where hail and thermal cycling govern the design, and South Florida, where hurricane design pressures, product approval, and salt air govern it. Same systems, different engineering. We scan and measure every roof before we quote, then hand you repair, restoration, and replacement numbers so the decision is yours rather than a salesman's.

Two Markets, Two Engineering Problems

Dallas–Fort Worth: hail, 100°F-plus deck temperatures, and ponding on undersized drains. We specify thicker membrane over hail-rated cover board with tapered polyiso.
South Florida: hurricane uplift, wind-driven rain, daily UV, and salt air. Assemblies carry current Florida product approval or a Miami-Dade Notice of Acceptance with engineered perimeter and corner attachment.

What's Included

TPO, PVC, EPDM, modified bitumen, metal retrofit and restoration coatings
Infrared moisture scan and drone report before any scope is written
HVHZ-approved assemblies in Miami-Dade and Broward
Hail-rated cover board and tapered drainage on North Texas roofs
After-hours and phased installs for occupied buildings
15–30 year manufacturer NDL warranty options

Systems We Install

Heat-welded TPO for most modern low-slope buildings; PVC where grease, chemical exhaust, or heavy equipment traffic would destroy a lesser membrane; EPDM on wide-open roofs and as a restoration candidate; two- and three-ply modified bitumen where redundancy and complicated parapet detailing matter; standing-seam metal and retrofit framing over failing metal buildings; and silicone or acrylic restoration where the scan shows the roof is still sound.

Repair, Restore, Or Replace — All Three Numbers

An infrared scan tells us how much insulation is wet. Under roughly a quarter, replacing the wet sections and restoring the rest typically buys 10–15 years at a fraction of replacement cost. Above that, or with a compromised deck, restoration just buries the problem and you pay twice inside five years. We show you the scan, not just the conclusion.

Working Around Your Tenants

Occupied buildings get phased scopes: after-hours tear-off, weekend crane and hoist lifts, interior protection under rooftop units, and section-by-section dry-in so nothing is left open overnight. Restaurants and retail usually get overnight work; distribution buildings get weekend phases scheduled around shipping windows.

Maintenance That Protects The Warranty

Commercial roofs fail at the details — pitch pans, equipment curbs, and drain sumps — not in the field of the membrane. Our semi-annual program clears drains, reseals penetrations, and delivers a photo report before and after storm season, which also satisfies the inspection requirements most NDL warranties carry.

FAQ

Frequently Asked Questions

Which commercial roof system is right for our building?

It comes down to deck type, how much of the existing insulation is wet, rooftop equipment and exhaust, exposure, and how long you plan to hold the building. We scan the roof first and then present repair, restoration, and replacement side by side instead of leading with one product.

Do you work in both Texas and Florida?

Yes. We run commercial crews across Dallas–Fort Worth and across South Florida from Palm Beach through Fort Lauderdale to Miami. The systems overlap; the engineering does not — North Texas roofs are designed around hail and thermal cycling, South Florida roofs around hurricane design pressures and salt air.

How is a South Florida commercial roof different from a Dallas one?

In South Florida the assembly has to carry current product approval, and in Miami-Dade and Broward a High-Velocity Hurricane Zone Notice of Acceptance, with engineered perimeter and corner attachment. In Dallas–Fort Worth the same membrane gets specified thicker, over a hail-rated cover board, with tapered drainage to stop ponding.

Can you keep our tenants operating during the work?

Yes. Most commercial projects are phased — after-hours tear-off, weekend lifts, section-by-section dry-in so no part of the building is left open overnight.

What warranties are available?

Manufacturer NDL warranties of 15 to 30 years on qualifying single-ply and modified-bitumen systems, plus Ariel Roofing's own workmanship warranty. As a certified installer, the manufacturer registers and inspects the warranty.

Do you price commercial roofs over the phone?

No. Commercial pricing follows an on-site inspection with an infrared moisture scan and measurements. You get a fixed-price scope you can compare line for line against any other bid.

Commercial Roof Systems

South Florida Commercial Systems

Texas Commercial Markets

South Florida Commercial Markets

Related Services

Ready For A Free Roof Inspection?

Get A Free Inspection +1 469-833-2332