Commercial Metal Roofing • Frisco

Commercial Metal Roofing & Retrofits in Frisco, TX

Frisco, Collin County Licensed & Insured

Get Started

Free Roof Inspection

— Free Roof Inspection

Tell us about your roof.

Ariel Roofing installs, restores, and repairs commercial metal roofing on commercial buildings across Frisco and Collin County. Standing-seam systems and retrofit framing over failing metal roofs. Screw-down metal on DFW industrial and agricultural buildings loses its washers to thermal cycling and hail. A standing-seam retrofit removes the exposed fasteners that cause most of those leaks. Expected service life: 40+ years.

Frisco Considerations

  • Collin County takes some of the heaviest hail in the metroplex, and new large-format roofs see severe thermal cycling.
  • City of Frisco permits commercial re-roofs with inspections, and appearance standards apply to visible roof surfaces in master-planned districts.

What's Included

  • 24-gauge standing seam with concealed clips
  • Retrofit sub-framing over existing metal without a tear-off
  • Single-ply and coating options for low-slope metal buildings
  • Kynar 500 finishes with long-term color warranties
  • Full curb, ridge, eave, and gutter detailing

How Commercial Metal Roofing Actually Performs

Commercial metal fails at fasteners and panel laps, not at the steel. A retrofit lets you frame over the existing roof, add insulation, and get a new watertight standing-seam surface without shutting the building down or landing a tear-off in your operating budget.

Why It Matters In Frisco

Screw-down metal on DFW industrial and agricultural buildings loses its washers to thermal cycling and hail. A standing-seam retrofit removes the exposed fasteners that cause most of those leaks. New corporate campuses, hospitality, and fast-growing retail centers. The Star district, Frisco Station, Hall Park, Preston Road retail, and the industrial parks off Main Street and FM 423.

The Buildings We Install It On In Frisco

Newer corporate campuses and hospitality along the Dallas North Tollway, medical office buildings, large retail centers with long low-slope runs, and light industrial on the east side.

Where We'd Recommend Something Else

If the existing structure cannot carry the added load or the deck below is corroded through, a retrofit is the wrong call. We check structure before we quote one.

What The Proposal Includes

Infrared moisture scan results, deck and insulation condition, tapered drainage design where it is needed, attachment and flashing detail, phasing plan around your operations, warranty terms, and a fixed price. No allowances that turn into change orders once the roof is open.

Service Area

Commercial Metal Roofing service area — Frisco, TX

FAQ

Frequently Asked Questions

Do you install commercial metal roofing in Frisco, TX?

Yes. Ariel Roofing installs and repairs commercial metal roofing on commercial buildings throughout Frisco and Collin County. Screw-down metal on DFW industrial and agricultural buildings loses its washers to thermal cycling and hail. A standing-seam retrofit removes the exposed fasteners that cause most of those leaks.

How long does commercial metal roofing last in Frisco?

40+ years is the realistic service range when the system is installed to the manufacturer's detail and maintained. In Frisco, collin County takes some of the heaviest hail in the metroplex, and new large-format roofs see severe thermal cycling. That exposure — not the sheet itself — is what determines whether you reach the top or the bottom of that range.

What does a commercial metal roofing project cost in Frisco?

We don't quote commercial roofing by the square over the phone. Price depends on deck type, existing insulation and how wet it is, tapered drainage design, rooftop equipment, access, and phasing around your tenants. We scan and measure the roof first, then hand you a fixed-price scope you can compare line for line.

Do you handle permits and inspections in Frisco?

We pull the commercial re-roof permit in Frisco, meet the inspections, and provide the insulation and membrane documentation the energy code requires on a tear-off.

Can you work around our tenants and operating hours?

Yes. Most of our Frisco commercial work is phased — after-hours tear-off, weekend lifts, and section-by-section dry-in so no part of the building is ever left open overnight.

Should we repair, restore, or replace?

We give every owner all three numbers. An infrared scan tells us how much insulation is wet. Under roughly a quarter, restoration usually buys 10–15 years at a fraction of replacement. Above that — or with a compromised deck — replacement is the cheaper decision over five years.

Ready For A Free Roof Inspection?