Commercial Metal Roofing & Retrofits in Garland, TX

Yes. Ariel Roofing installs and repairs commercial metal roofing on commercial buildings throughout Garland and Dallas County. Screw-down metal on DFW industrial and agricultural buildings loses its washers to thermal cycling and hail. A standing-seam retrofit removes the exposed fasteners that cause most of those leaks.

40+ years is the realistic service range when the system is installed to the manufacturer's detail and maintained. In Garland, hail alley exposure with repeated damaging storms, plus 100°F-plus summer deck temperatures on large uninsulated metal buildings. That exposure — not the sheet itself — is what determines whether you reach the top or the bottom of that range.

We don't quote commercial roofing by the square over the phone. Price depends on deck type, existing insulation and how wet it is, tapered drainage design, rooftop equipment, access, and phasing around your tenants. We scan and measure the roof first, then hand you a fixed-price scope you can compare line for line.

We pull the commercial re-roof permit in Garland, meet the inspections, and provide the insulation and membrane documentation the energy code requires on a tear-off.

Yes. Most of our Garland commercial work is phased — after-hours tear-off, weekend lifts, and section-by-section dry-in so no part of the building is ever left open overnight.

We give every owner all three numbers. An infrared scan tells us how much insulation is wet. Under roughly a quarter, restoration usually buys 10–15 years at a fraction of replacement. Above that — or with a compromised deck — replacement is the cheaper decision over five years.